Coverage calculator
Based on: 601 WRP covers approximately 50-55 Square feet / litre. Minimum 2 coats are recommended
Estimated packs:
—
Estimate only — actual usage depends on surface, thickness, and wastage. Contact us to confirm quantities.
Product information
Tap a section to read full description, specs, and other details.
Features & benefits Show
- Solvent free silicone concentrate.
- Ready to use.
- Easily applicable by brush, spray or roller
- Impermeable Preventspenetration of water and moisture through the surface.
- It aids in retaining the heat insulation properties of the wall because loss of heat through the wet brick is 1 ½ times greater than when it is dry.
- It protects the surface from attack of salty and acidified atmosphere
- It prevents from formation of efflorescence.
- It prevents the surface damage from water and frost attack.
- “Microporous” Allows the substrate to breathe (good water permeability).
- Prevents the growth of microorganisms such as fungi and algae.
- Their low viscosity and surface tension enable them to penetrate deeply in the material Excellent resistance to UV rays and weathering conditions.
- It performs well in a temperature ranging from -20°C to 50°C It performs well on alkaline substrates
Area of application Show
601 WRP is recommended for a “HYDROPHOBISATION” (WATER REPELLENCY) of facades. It is used as a general purpose water repellent Brush application is the simplest method flat brushes or rollers can be used for application, while solution is applied, as the success or failure of such treatment depends on this factor.
• Surface penetration is most important step before application to get best results and avoid failure.
• The surface must be free from any loose materials, crumbling powdery encrusted walls, fungus, moss, oil, grease and mould release agents.
• Clean the surface using scrappers and wire brushes.
• Then clean the walls with high pressure water, wait for 2 days for the surface to dry.
• The walls must be dry before the application
• Use of acidic and alkaline chemicals, detergents, cationic surfactants should be avoided
• It is advisable to wait for 28 days for curing the fresh masonry / new concrete.
Coverage Show
601 WRP covers approximately 50-55 Square feet / litre. Minimum 2 coats are recommended